Assembling the Tower of Power v2.0
Now that all the threaded rod has been cut and the mounts secured to the two shelves it was time to start assemble the 7 towers. I assembled the towers using the highest rated module on cell 7 and working down to cell 1 and then working backwards till all 7 towers were complete.
So far so good 
Working backwards for second row 
getting there 
I now hate threaded rod 
Bottom all done 
Top left column tightened down
Unfortunately, I ran out of spacers on the very last module! Adding the last module to the top right tower will need to wait for another day.
